How to change a processor in a HP Laptop

Laptops Mag is supported by its audience. When you purchase through our links, we may earn an affiliate commission at no additional cost to you.

How to change a processor in a HP Laptop

So your laptop is running a bit slow, and you think maybe it’s time for an upgrade? Well, before you go out and spend hundreds of dollars on a new processor, there are a few things you can try to speed it up. In this post! We will show you how to change a processor in a laptop. Keep in mind that this process may be different for your specific computer, so be sure to consult your owner’s manual or tech support before getting started. If you laptop not start in safe mode then read How to start an HP laptop in safe mode?

Can you change the processor of a laptop?

Can I change my processor on a laptop? The short answer is yes. However, only some laptops allow you to upgrade their components, and not all models fit every type of device. 

How to change a processor in a HP Laptop

Can You Replace The Processor In A Laptop?

You can’t upgrade your laptop processor. In case, you want to spend a lot of money on something that may or not work well with what’s already installed in there. Hence, the risk of damaging both components by mixing them up!

Upgrading your computer is often a challenge. You have to detach the CPU for an upgrade, but most laptops rely on soldiers, which makes this difficult- especially if you’re unsure which socket it goes into! If there are no issues with fitment then, be sure to check online or by looking inside of course. However, when trying these methods first ensure everything will work before spending any money. The reason is that once installed wrong parts can cause even more problems than they solve. You must read How to turn off airplane mode on a Dell laptop?

How To Choose The Right Laptop Processor? 

CPU choice is often difficult. But now, with our guide, it will become much easier! 

We’ve shown which processors are best suited for various devices and types of computers- so take advantage before the wait time increases exponentially by upgrading yourself!

How to change a processor in a HP Laptop

How the motherboards and processors work

The size and connections of processors differ depending on the framework. As a result, you’ll have to ensure that your chosen CPU is compatible with the initial motherboard before installing it into any device or system based on AMD/Intel technology.

Determine the right processor socket

The best way to know if your laptop has an Intel or AMD processor is by checking its packaging. If you’re looking up information on the motherboard, go under the CPU section and search for “Package header.” The chipset type will be listed right there in front of us!

Find the motherboard

With your existing motherboard, you can find a suitable laptop processor by looking at the chipset and socket size. You just need to search online for what type of system is right for you!


When you’ve determined which CPUs will work with your laptop, it’s time to move on. You may choose the perfect match for what kind of computing demand and geographical region are looking at. Whether that is an online store or one near me! Always compare prices before making any purchases, so as not end up spending more than necessary.”

How to Change a Processor of Laptop?

Your device is running slow? Upgrade to a new processor! It’s easy and doesn’t require you to buy an entire laptop.

How to change a processor in a HP Laptop

1.    Update the BIOS

Updating your computer’s BIOS can be a daunting task, but it’s imperative to ensure that you do so before installing any new hardware. If there are updated components available for purchase and installation to speed up the performance or enhance stability; then, make sure they get installed! People don’t know where this information is located on their laptops/desktops. Look no further than Google since most manufacturers have sites dedicated specifically, to updating Firmware (BIOS).

 update the bios

2.    Detach the battery:

Though there are many different designs, most processes for opening each model remain consistent. Some versions feature a single back panel that lets you access the memory card and hard drive, while others require more than just popping off one side to get inside where all parts are accessible. It includes batteries if they have them installed internally in Samsung laptops or chipsets like Intel’s E far faster speeds without sacrificing performance by doing so; because it doesn’t need power from an outlet during operation. You can also check out How to remove CMOS battery from Lenovo laptop?

Detach the battery

3.    Take out the back cover:

It’s now time to detach all the back shells on your computer. First, unplug both external and internal power sources from their respective ports located near where you’ll find screws underneath each plate for them to be detached easily without breaking anything or causing too much damage if there are still remaining pieces holding it secure while following these steps carefully so that nothing falls off during transport!

Take out the back cover

4.    Detach the keyboard:

The keyboard and wireless connection should be removed first. This will make it easier for you to detach the ribbon cable that connects them both, which allows access into other areas of your laptop if necessary like taking out any DVDs or writers installed there before beginning this procedure separately from what we’ll do! 

Gently loosen each individual screw with a Phillips head screwdriver while paying attention to where they came from when placing back onto their respective places on our list.

Detach the keyboard

5.    Remove the upper shell:

To remove your K LDS from its keyboard, start by removing any screws that may be underneath. You should also ensure you disconnect all ribbons or connectors if they’re present on the upper shell of both pieces because this will make it easier for us when we put them back together again!

Be cautious while doing so as there could still potentially remain some connection between two parts which would prevent us from replacing these correctly without either breaking something else in half first – not good. 

Don’t use too much force though; then, again sometimes things come apart enough even without using extra tools like pliers etc.

Remove the upper shell

6.    Detach display assembly:

Before you begin, be sure to check if your laptop has hinges at the bottom of its display. If so, then loosen them and take off any cables from the Wi-Fi antenna before setting it aside!

Detach display assembly

7.    Detach the heat sink:

Before accessing any internal parts, please put on the antistatic wrist strap and make sure you are grounded.

Detach the heat sink

8.    Replace CPU:

When installing the heatsink, verify that it is correctly seated by looking for any gaps between parts. Once installed and aligned with no issues present in your system then tighten down all screws on both sides before rotating them counterclockwise until they stop turning. It will securely fixate (fix) onto their respective sockets!

Replace CPU

9.    Quote thermal paste and reinstall:

Clean any leftover thermal paste using a lint-free rag and 99% isopropyl alcohol. Cleanse the heatsink if you have bought an old CPU! Apply a thin layer onto each core when it has dried, then spread well with the card before reassembling the laptop system again after installing fan & Heatsinks back into place.

Quote thermal paste and reinstall

Conclusion paragraph:

How to change the processor in a laptop can be a daunting task, but with the right instructions, it can be done relatively. We hope this article has helped you to understand the process and feel confident in your ability to replace the processor in your laptop. If you have any questions or need help completing this process, please don’t hesitate to reach out to us for assistance.

Leave a Comment

Your email address will not be published. Required fields are marked *